2
1.2 SPECIFICATIONS
1.2.1 STEREO SPECIFICATIONS
Output Power
Frequency Response
±0.1dB DC-20KHz at 1 watt into 8 ohms;
±1dB
DC-100KHz.
1KHz
Power
Harmonic Distortion
I.M. Distortion
(60Hz-7KHz
4:1)
Slewing Rate
Damping Factor
Output Impedance
Load Impedance
Voltage Gain
Input
Sensitivity
Output Signal
80 watts per channel minimum RMS (both channels
operating) into an 8 ohm load over a bandwidth of 1Hz-20KHz
at a rated RMS sum total harmonic distortion of 0.05% of the
fundamental output voltage.
90 watts RMS into 8 ohms, per channel, both channels operating, 0.1% total harmonic
distortion.
Less than 0.001% from
20Hz-400Hz,
and increasing linearly to 0.05% at
20KHz
at
80
watts RMS per channel into 8 ohms.
Less than 0.05% from 0.01 watt to 0.25 watts and less than
0.01%
from
0.25
watts to
80
watts into 8 ohms, per channel.
6 volts per microsecond (slewing rate is the maximum
value of
the
first
derivative
of the
output signal, or the maximum slope of the output signal).
Greater than 400,
DC-400Hz
into 8 ohms.
Less than 15 milliohms in series with less than 3 microhenries.
Rated for 8 ohm usage; safely drives-any load including completely reactive loads,
20.6±2%
or
26.3±.2dB
at maximum gain.
1.19 volts
±2%
for 80 watts into 8 ohms.
Unbalanced, dual channel.
Comentarios a estos manuales